ThThe machine is a deep hole processing equipment which mainly processes cylindrical workpieces. It can do drill, boring and burnishing, and can process through holes, stepped holes, blind holes, etc. The processing aperture accuracy can reach IT7~IT8 or above, and the surface roughness can reach Ra0.4-0.8μm. The internal chip removal method is used for drilling. The tool feed adopts the servo drive system to realize stepless speed regulation. The machine bed is made of high-quality cast iron, which has strong rigidity and good precision retention. The bed guide rail is quenched to have high wear resistance and good precision retention. Widely used in mechanical hydraulic cylinders, special oil cylinders, coal cylinders, hydraulic machinery, high pressure boiler tubes, petroleum, military, electric power, aviation and other industries.
Main technical specifications and performance
|
Technical specifications
SPECIFICATION
|
TECHNICAL DATE
|
|
T2135
|
|
CAPACITY
|
Boring diameter range
|
Boring diameter
|
φ100mm-φ350mm
|
|
Maximum diameter of borehole
|
Max drilling depth
|
φ60mm-φ100mm
|
|
Maximum boring depth
|
Max.boring depth
|
1000-15000mm
|
|
Workpiece clamping diameter range
|
Workpiece clamped dia.range
|
φ200mm-φ450mm
|
|
SPINDLE
|
Spindle center height
|
Height from spindle center to bed
|
450mm
|
|
Headstock spindle diameter
|
Spindle bore diameter
|
φ75mm
|
|
Front end taper hole of spindle
|
Taper of spindle bore
|
85mm 1:20
|
|
Spindle speed range
|
Range of spindle bore
|
30-500r/min 12 kinds
|
|
FEEDS
|
Feed speed range (stepless)
|
Feed speed range(infinte)
|
5-600mm/min
|
|
Rapid speed of carriage
|
Carriage rapid-moving speed
|
2m/min
|
|
MOTORS
|
Main motor power
|
Main motor poser
|
30KW
|
|
Motor power of hydraulic pump
|
Hydraulic pump motor power
|
1.5KW
|
|
Power of carriage rapid motor
|
Carriage rapid motor power
|
3KW
|
|
Feed motor power
|
Feed motor power
|
5.5KWAC servo
|
|
Cooling pump motor power
|
Cool pump motor power
|
5.5KW
|
|
OTHERS
|
Rated pressure of cooling system
|
Rated prdssure for cooling system
|
0.36Mpa
|
|
Cooling system flow
|
Flow of cooling system
|
300L/min
|
|
Rated working pressure of hydraulic system
|
Rated working pressure for hydraulic system
|
6.3Mpa
|
|
Maximum axial force on pressure head
|
Max.axial force for carriage support
|
68KN
|
